Denon AVC-3890 Manuale Utente

1/15 DENON AVR/AVC control protocol Ver. 4.0a Application model : AVR-3805/AVC3890 Application terminal : RS-232C Connector specification Connect

10/15 EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function example *RES. PW ON POWER ON/STANDBY change PWON<CR> STANDBY

11/15 EVENT PARAMETER function example *RES. ZM ON MAIN-ZONE ON/OFF change ZMON<CR> OFF ZMOFF<CR> Z1 PHONO MULTI ZONE

12/15 EVENT PARAMETER function example *RES. TF ****** (6 digits) TUNER Frequency change TF105000<CR> --- ****.** kHz at AM ban

13/15 EVENT PARAMETER function example MS DIRECT SURROUND mode change MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> ST

14/15 EVENT PARAMETER function example DTS NEO:6 CINEMA MSDTS NEO:6 C<CR> DTS NEO:6 MUSIC MSDTS NEO:6 M<CR> DTS S

15/15 EVENT PARAMETER function example PS ROOM EQ:NORMAL ROOM EQ mode change PSROOM EQ:NORMAL ROOM EQ:FRONT PSROOM EQ:FRONT ROOM EQ:F

2/15 Protocol specification The following three data forms is defined. COMMAND : The message sent to a system(AVR/AVC) from a controller(Touch

3/15 The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSTHX SURROUND EX<CR>

4/15 Others A) COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE ch

5/15 COMMAND and PARAMETER list COMMAND PARAMETER function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<

6/15 COMMAND PARAMETER function example CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP<CR> SB DOWN CVSB DOWN<CR>

7/15 COMMAND PARAMETER function example Z2 PHONO MULTI ZONE-2 mode set , and select source at AVR-3805 Z2PHONO<CR> | ---The na

8/15 EVENT PARAMETER function example MS DIRECT SURROUND mode set MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STEREO

9/15 TF, TP, TM COMMAND : '*' parameters can NOT operate when INPUT source isn’t TUNER. EVENT PARAMETER function example MS MPEG2 A